Special cameras
  • HIT:66

    Video

    Video has 2 mode: (1) One-channel, (2) Multi-channel; Each video mode has 3 mount type: (1)Ceiling, (2)Table, (3)Wall; Under different video mode there are different fisheye type, different video mode switch to each other the device need to restore, switch mount type and fisheye type don’t need restore. After changing video mode the configuration related to video will reset to factory default setting, include motion alarm, tamper, OSD.

     

    1.One-channel

    In the One-channel mode the function same as before.

    image.png

    2.Multi-channel

    Multi-channel video mode has 3 fisheye types:

     

    (1)Fisheye+Panoramat+3*PTZ

    Fisheye+Panorama+3*PTZ, in this fisheye type there are 5 channels, video recording just get stream 1(fisheye stream), all the 5 channels have 2 video encode types: H.264 and MJPEG; maximum frame rate is 15; in every channel can set own OSD; motion detect only can be set in the fisheye channel, but it is efficacious in other channels too; tamper is only can be set in the fisheye channel,it is efficacious in other channel too.

    Channel 1 is Fisheye channel: resolution only one 1280*1280;

    Channel 2 is 360°Panorama channel(in the Wall mount type the image is 180°Panorama):resolution support 2018*1536 and 1080P;

    From channel 3 to 5(PTZ): resolution support 1024*768, D1, VGA.

     

    (2)Fisheye(main)+Fisheye(sub)+3*PTZ

    Fisheye(main)+Fisheye(sub)+3*PTZ, in this fisheye type there are 4 channels, video recording just get stream 1(fisheye stream), all the 4 channels have 2 video encode types: H.264 and MJPEG; maximum frame rate is 15; in every channel can set own OSD;motion detect only can be set in the fisheye channel, but it is efficacious in other channels too; tamper is only can be set in the fisheye channel, it is efficacious in other channel too.

    Channel 1 is Fisheye channel: in this channel there are 2 streams, stream 1 support 2 kind resolution:2048X2048, 1280X1280; stream 2 only one 720X720;

    From channel 2 to 4(PTZ): support 3 kinds resolution 1024X768、D1、VGA.

     

    (3)Fishieye +4*PTZ

     Fishieye+4*PTZ, in this fisheye type there are 4 channels, video recording just get stream 1(fisheye stream), all the 5 channels have 2 video encode types: H.264 and MJPEG; maximum frame rate is 15; in every channel can set own OSD;motion detect only can be set in the fisheye channel, but it is efficacious in other channels too; tamper is only can be set in the fisheye channel, it is efficacious in other channel too.

    Channel 1 is Fisheye channel: resolution is 1280X1280;

    From channel 2 to channel 5 (PTZ): support 3 kinds resolution 1024X768、D1、VGA.


    image.png


  • HIT:79

    CGI Alarm Service Center config page introduction

    image.png

    The CGI alarm messages pushed by the device are assembled in the format following the IP addresses of the start and end URL. The assembled string is sent to the CGI alarm server through the HTTP protocol.


    (1) URL Start: Indicate that send URL at the alarm starting point, the format is as follows:

    AThe format of the reporting information URL for license plate recognition is defined as follows:

     

    http://192.168.35.74:80/MajorAlarmType&MinorAlarmType&LicenseNumber&SerialNumber&Contry&Action&AlarmTime

     

    BThe format of the reporting common alarm information is defined as follows:

     

    http://192.168.35.74:80/MajorAlarmType&MinorAlarmType&SourceName&DeviceID&DeviceIP&AlarmTime&Description

     

    The 192.168.35.74 is target IP address (Alarm server IP address)80 is the corresponding port

    (2) URL End: Indicate that send URL at the alarm ending point, the format is same as URL Start. URL Start can be same as URL End.

    (3) Username: username of IPC; Password: password of IPC.

    (4) The proxy server is a CGI alarm forwarding server that implements alarm forwarding, among which the address is forwarding IP (for example:192.168.35.74), the port is forwarding port (for example: 80)

    (5) The platform User Name: username of the forwarding server (for example:1234565);

    The platform password: password of the forwarding server(for example: 123456).

    (6) Test the connection to the specified HTTP server: It used to test whether the network between IPC and proxy server is unobstructed. When the test button is clicked, if the network between IPC and is unobstructed, display test result is successful, otherwise display test fails.

    (7) After completing filling in the above information, you need to click the “Apply” button to save the data. 

    (8) Status is ON

    (9) Status is ON 

    (10)Above item (1), (2), (3), (4), (5) can’t be empty.


  • HIT:86

    1. License plate must be readable and well lit

    2. License plate dimensions must be at least :

      * 150 pix for rectangular plates and 100 pix for two row plates (for Russia, Kazakhstan,Armenia, Uzbekistan, Serbia).

      * 130 px for rectangular plates and 70 pix for two row plates (for all other supported countries).

    3. Allowed tilt ­ 5 degrees (clock­ and counterclockwise).

      image.png

    4. Vertical angle and Horizontal angle: should not exceed 30 degrees:

      image.png

    5. Example of good license plate at day and night

    image.png

    image.png

  • HIT:59

    image.png

    1.lResolution 8K@30fps 

    2.lH.265 Smart Encode

    3.lField of View Horizontal 360° + Vertical 360°

    4.Edge Panoramic Splicing Image Output 

    5.Minimum Object Focus Length 1m 

    6.Support  View Mode 180°,360°,Fisheye,Planet,Auto Tour 

    7.POE Power Supply 

    8.IP66, -40~60


  • HIT:66

    1. Face detection: Detect face of human

    2. Upbody detection:Detect face and shoulder part of human

    3. Fullbody detection:Detect the human shape

    4. Display trace:Display the information of tracing

    5. Confidence coefficient:Face detection sensitivity, the value range is high, medium, low, the larger the value is, the higher the sensitivity. The higher the sensitivity value is, the higher the  detection rate will be, but the more false detection may occur, such as the false detection of the patterns on pedestrian clothes to adult faces.

    6. Smallest pixel:When the pixel of the face in the image is less than the set value (the minimum pixel forface recognition), it is not captured.

    7. Snapshot mode: There are two types timing and optimal.

    8. Upload image interval: 1~10 sec.

    9. Yaw degree:Set face Angle to filter out

    10. FTP upload image matting: Enable or disable

    11. FTP upload whoel image: Enable or disable

    image.png


    1. Temperature Unit: Celsius and Fahrenheit temperature units are available.

    2. Ambient Type :The ambient of camera.Outside and Inside are available. Inside suggest to be selected when the ambient temperature change frequently.

    3. Ambient Temperature : The ambient temperature of camera. It is set when ambient is outside.

    4. Cavity Temperature : The cavity temperature of camera.

    5. Correction Coefficient: Correction coefficient refers to the deviation of measured object temperature and actual temperature.

    6. Area Temperature Display Mode : The display position of temperature information on the live-video image.

    7. Mount distance:  The actual distance between the detection person and the device, it is set to facilitate the temperature measurement accuracy.

    8. Alarm Threshold : The human body temperature detected exceeds the set threshold temperature alarm.

    9. Alarm Interval(1-1800S) : N/A

    10. Measure Mode: Choose the measure mode from general to preset.

    11. Display alarm area :  Enable or disable the display alarm area


    image.png

  • HIT:63

    Face Detection: On

    Confidence Coefficient:Mid

    Smallest Pixcel:80

    Image Matting Quality:Mid

    Snapshot Mode:Timing

    Upload image interval: 5s

    Yaw Degree: 60

    Titt Degree: 60

    setting detection area

    image.png

  • HIT:58

    Run Sunview software

    1. open "Devices" module

    2. click "Auto Search" to find the IP Cameras

    3. select it

    4. click "Add" to add it to the device list

      image.png

Newsletter

Enter your email address to receive the latest news & products information

Contact Us